How To Fix Empty Paper Tray Printer Problems

Checkout the topmost answers for the question on how to fix empty paper tray issue

While printing something, do you run over a blunder that demonstrates the printer is out of paper but has paper or something moreover? 

It is possible that the printer has come up short on paper as the mistake recommends, however it very well may be a breakdown if there is adequate paper in the plate. 

Anyone can utilize any of these underneath given strides for investigating printer issues. 

1) Confirming the Paper and Reload it 

• Right off the bat, check the paper's condition stacked in the printer's plate. 

• If the paper is moist, torn, or bowed then there is a requirement to supplant it with crisp paper. Likewise, ensure that papers are of specific length and type. 

• Currently, alter the borders of paper by hitting that on a flat surface and place it again in the paper plate of the printer

• The pile of paper ought not to include over a particular number of sheets either. 

2) Verifying the Back Panel Cover of the Printer 

• A board at the back of the printer probably won't be set up. 

• Turn the gadget around and make sure if its back board isn't slightly open. 

• If it isn't shutdown completely, there may be stuck paper there. 

• Provided that this is true, remove the backboard completely.

• Clear the folded paper, and spot the board back on the printer. 

3) Reset the Printer 

• Initially, unplug the power link straightaway without controlling off the printer. 

• At that point, hang tight for 30 seconds preceding stopping it back in the printer too. 

• If the printer doesn't turn on consequently, push on its manual power button. 

4) Cleaning Rollers of the Printer 

• If the dust has aggregated in its rollers, it can prompt paper feed blunders. 

• Subsequently, clean it whenever required by turning off the printer and unplug its capacity link first. 

• While cleaning the rollers, utilize a bit of build-up free material and new water. 

• Once the above step is finished leave it to dry for some time before setting it back. 

• From that point forward, plug back the power link and turn on the printer. 

5) Crosschecking if the Printer Spooler is Running 

The spooler administration oversees print employments on Windows. If the spooler was not running, you would need to empower it for investigating printer issues. 

Here are the means by which to check the spooler setup. 

• Press Windows and R keys to dispatch the Run discourse box. 

• In the exchange box, type services.msc and press Enter. 

• In the rundown of Services that opens straightaway, look down to and discover the Print Spooler. 

• Check if it’s Status has appeared as Started. 

• If it stop then simply tap right-click on Printer Spooler for opening the properties

• In that, change the Service Status to how it ought to be by tapping on the Start button under the General 

• At that point, click on Apply and OK fastens to affirm the changes. 

6) Clearing the Cached Print Jobs 

Clearing this will delete print employments stuck on the print line. Follow the beneath steps to do that as a component of investigating printer issues. 

Open Windows Explorer, type the way c:\windows\system32\spool\printers on its location bar and press the Enter 

Pick the documents in the Printers organizer that opens by squeezing Ctrl and A keys, click Organize tab on the toolbar of Windows Explorer, and pick Delete Printer Spooler Folder 

7) Updating the Printer Driver 

The printer error may be identified with its obsolete driver introduced on a PC. The equivalent goes for printers. In this manner, staying up with the latest is one route for investigating printer issues. 

Follow the means referenced underneath to do it through Windows 10 Update. 

• Dispatch Cortana on Windows 10 and type Device Manager in its inquiry box. 

• Pick Device Manager from the indexed lists. The Device Manager will open in another window. 

• Pick Printers from the Device Manager and right-click on your printer. This will uncover the unique situation or spring up menu. 

• Select the alternative Update Driver Software from the menu that springs up after right tapping on the printer symbol. 

8) Updating Printer Software 

• At that point, pick the connection to look for an update driver naturally. 

• Hang tight for quite a while for Windows to scan for the driver on the web. 

• Installing the update if the OS finds the printer driver by adhering to the directions. 

However that Windows refreshes select print drivers, one would need to check for the equivalent whenever required. 

As it were, if your printer driver's update isn't found in the OS update or if there is no arrangement to do it through the web, you would need to download the driver from your printer maker website and introduce it physically. 

In case you want to fix how to resolve empty paper tray Issue while printing in the wake of overhauling the OS to this form, check-in the maker website to know whether the gadget is good with it. 

On the other hand, feel free to connect with our printer administration specialists for high-end solutions.